H-F Hanging Feeder for cooling tower
A reality that cannot be ignored
During the operation of the cooling tower, corrosion, scaling and microbial problems will occur. At this stage, adding chemical agents is the main means to solve the problem of cooling water treatment. Large cooling water systems need to be equipped with dosing pumps, chemical storage tanks, monitoring and control equipment. However, for the most widely used small cooling towers, due to limitations in initial cost, installation space, operating environment and maintenance conditions, the configuration of dosing equipment is very imperfect, and a large number of small cooling towers cannot carry out effective chemical treatment.
Specifically designed for small cooling towers
H-F suspended cooling tower doser is a product designed to solve the problem of dosing in small cooling towers. It is used to add chemicals in the form of tablets, such as corrosion and scale inhibitor tablets, chlorine tablets, bromine tablets, acid tablets, etc. When in use, add the tablets to the cylinder and hang them under the spray water of the cooling tower. When the cooling tower is running, the spray water will collect in the water tray, dissolve the medicine, and then overflow into the system through the bottom hole and the edge of the tray. You can adjust the dosing speed by adjusting the opening of the opening by rotating the water plate and cylinder. When the bottom tablet dissolves, the upper tablet will fall to replenish the medicine and achieve long-term dosing. When the cooling tower is not working, all the water in the water pan will drain from the bottom hole, and the tablets will be in a dry state, so the dosing will stop and there will be no overdosing or waste of medicine.
Specifications
Dosing barrel height | 20cm | Dosing barrel inner diameter | 7cm |
Addition amount of chemicals | 700—1000g | Spray tray diameter | 15cm |
Method of use
A: Open the upper cover, B: Add tablets, C: Adjust the opening, D: Hanging in cooling tower.